Wlan Module - HP ENVY x360 Maintenance And Service Manual

4. Remove the SSD (4) by pulling the drive away from the slot at an angle.
5. Thoroughly clean the thermal material from the surfaces of the SSD slot (1) and the SSD shield
(2) each time you remove the SSD and shield. Replacement SSD thermal material is available
in the SSD Thermal Pad Kit, spare part number N91032-001. The following illustration shows the
replacement thermal material locations.
To replace the SSD, reverse the removal procedures.
NOTE: The SSD is designed with a notch to prevent incorrect insertion.

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-5 WLAN module descriptions and part numbers
Description
Mediatek MT7925 M.2 2230 Wi-Fi 7 + Bluetooth 5.4 worldwide WLAN module
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Spare part number
N64647-005