d.
Display assembly (see
e.
Fan (see
f.
System board (see
g.
Heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise
(2), until you hear a click.
2.
Lift the processor (3) straight up, and remove it.
NOTE:
processor socket when you install the processor.
Reverse this procedure to install the processor.
50
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Display assembly on page
Fan on page
42)
System board on page
Heat sink on page
The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the
40)
43)
47)