3.
Insert the drive (1) into the socket and onto the bottom bracket.
4.
Place the top bracket (2) over the drive.
5.
Install the two Phillips screws (3).
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
WLAN module
To remove the WLAN module, use this procedure and illustration.
Table 5-4
WLAN module descriptions and part numbers
Description
Intel Wi-Fi 7 BE200 + Bluetooth 5.4 WLAN, non-vPro
Intel AX211 Wi-Fi 6E Bluetooth 5.3 WLAN
Spare part number
N39883-005
M53366-005
WLAN module
35