HP ENVY m6 Maintenance And Service Manual page 42

CAUTION:
in various system problems.
To update BIOS:
1. Navigate to www.hp.com.
2. Click Support & Drivers > click Drivers & Software.
3. In the Enter a product name/number box, type the computer model information, and then click Search.
4. Click the link for the computer model.
5. Select the operating system, and then click Next.
6. Under Step 2: Select a Download, click the BIOS link.
7. Click the link for the most recent BIOS.
8. Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the memory module:
1. Lift the left edge of the memory module shield and swing it up and to the right until the memory
modules are accessible.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Failure to update the computer to the latest BIOS prior to installing new memory may result
Battery on page
WLAN module on page
29).
30).