Battery - HP ENVY m6 Maintenance And Service Manual

Hide thumbs Also See for ENVY m6:

Table of Contents

Battery

Description

6-cell, 62-Wh, 2.80-Ah, Li-ion battery

6-cell, 47-Wh, 2.20-Ah, Li-ion battery

Before removing the battery, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery:

WARNING!

computer, a replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION:

Removing a user-replaceable battery that is the sole power source for the computer can cause

loss of information. To prevent loss of information, save your work or shut down the computer through

Windows before removing the battery.

Turn the computer upside down on a flat surface.

Slide the battery release latch (1) to release the battery.

NOTE:

Pivot the battery (2) upward.

Remove the battery (3) from the computer.

Reverse this procedure to install the battery.

To reduce potential safety issues, use only the user-replaceable battery provided with the

The battery release latch automatically returns to its original position.

Spare part number

710417-001

710416-001

Component replacement procedures

Table of Contents