Lexmark C522 Service Manual page 55

User status and attendance messages (continued)
Error code
62 Disk full
63 Unformatted disk
64 Unsupported disk
format
80 Fuser life warning
80 Replace fuser
82 Waste toner box
nearly full
82 Replace waste toner
box
Action
• Press until Continue appears, and then press
continue processing.
Any information not previously stored on the hard disk is deleted.
• Delete fonts, macros, and other data stored on the hard disk.
• Install a larger hard disk.
• If this does not fix the problem, replace the system card. See
page 4-79.
• Press until Continue appears, and then press
continue printing.
• Format the disk.
• If the error message remains, replace the hard disk.
• If this does not fix the problem, replace the system card. See
page 4-79.
Continue appears, and then press
• Press until
continue printing.
• Format the disk.
• If the error message remains, replace the hard disk.
• If this does not fix the problem, replace the system card. See
page 4-79.
• Press until Continue appears, and then press
continue printing.
• Order a replacement fuser. When print quality is reduced, install the new fuser using the
instruction sheet that comes with the replacement fuser.
• If this does not fix the problem, replace the system card.See
page 4-79.
• Replace the fuser.
• If this does not fix the problem, replace the system card. See
page 4-79.
Continue appears, and then press
• Press until
continue printing.
• If printing continues, order a replacement waste toner box immediately.
• If the problem persists, open the front access door and check the bump aligner shaft for
binding. Clear the binding if possible. If not possible, contact your next level of service.
• Replace the waste toner box using the instruction sheet that comes with the replacement
waste toner box.
• Ensure that there is no interference between the waste toner box and the printer.
• If the problem persists, open the front access door and check the bump aligner shaft for
binding. Clear the binding if possible.
• If the problem persists, replace the system card. See
page 4-79.
• If the problem persists, contact your next level of service.
to clear the message and
"System card removal" on
to clear the message and
"System card removal" on
to clear the message and
"System card removal" on
to clear the message and
"System card removal" on
"System card removal" on
to clear the message and
"System card removal" on
Diagnostic information
5022-xxx
2-23