Lexmark C522 Service Manual page 238

5022-xxx
7.
Place the left side of the camshaft assembly through the opening in the waste toner shutter (G). Make sure
the cam (H) engages the waste toner shutter (G). Also make sure the drive pinion (I) engages the upper
retraction plate (J).
8.
Install the rear mounting screws (K).
9.
Slide the spring (L) and the lever arm (M) onto the shaft.
10.
Install the e-clip (N).
G
H
L
M
N
4-88
Service Manual
K
I
J