10.
Remove the screw (D) from the rear.
11.
Disconnect the cables for the fan at JFAN1 (E), the operator panel at JOPP1 (F), the high voltage power
supply connector at JHVPS1 (G), and the bin full sensor at JBIN1(H) (for network printers only) from the
system card.
12.
On the left side, unplug the connector (J) from CN1 on the high voltage power supply (HVPS).
13.
Lift and remove the top access cover assembly.
D
Rear
5022-xxx
Left
side
4-31
Repair information