Lexmark C522 Service Manual page 54

5022-xxx
User status and attendance messages (continued)
Error code
54 Network <x>
software error
55 Unsupported option
in slot <x>
56 Parallel port <x>
disabled
56 Standard parallel port
disabled
56 Serial port <x>
disabled
56 Standard USB port
disabled
58 Too many flash
options installed
58 Too many trays
attached
61 Remove defective
disk
2-22
Service Manual
Action
• Press until Continue appears, and then press
continue printing.
The job may not print correctly.
• Program new firmware for the network interface.
• POR the printer. If this does not fix the problem, replace the PCI card.
• Turn the printer off.
• Unplug the power cord from the wall outlet.
• Remove the unsupported option.
• Connect the power cord to a properly grounded outlet.
• Turn the printer on.
• If this does not fix the problem, replace the system card. See
page 4-79.
• Press until Continue appears, and then press
The printer discards any data received through the parallel port.
• Make sure the Parallel Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace the PCI card.
• Press until Continue appears, and then press
The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace the PCI card.
• Press until Continue appears, and then press
The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace the system card. See
page 4-79.
• Turn off and unplug the printer.
• Remove the excess flash memory.
• Plug in the printer, and turn it on.
• If this does not fix the problem, replace the system card. See
page 4-79.
This printer does not support the 500-sheet assembly.
• Turn off and unplug the printer.
• Remove the 500-sheet paper tray assembly.
• Plug in the printer, and turn it on.
• If this does not fix the problem, replace the system card. See
page 4-79.
• Press until Continue appears, and then press
continue printing.
• Install a different hard disk before performing any operations that require a hard disk.
• If this does not fix the problem, replace the system card. See
page 4-79.
to clear the message and
"System card removal" on
to clear the message.
to clear the message.
to clear the message.
"System card removal" on
"System card removal" on
"System card removal" on
to clear the message and
"System card removal" on