Diagnostics Menu; Diagnostics Menu Structure; Available Tests - Lexmark C522 Service Manual

Hide thumbs Also See for C522:
Table of Contents

Advertisement

5022-xxx

Diagnostics menu

Note: Tray 2 refers to the 500-sheet tray located in the 500-sheet option assembly.

Diagnostics menu structure

When the Diagnostics mode is entered, each Diagnostics main menu item displays on the operator panel. When
a diagnostic test is selected from the main menu, a sub menu displays and each individual test displays in the
order shown. Any options that are referred to in the menus are displayed when the option is installed.

Available tests

The tests display on the operator panel in the order shown:
Diagnostics mode tests
REGISTRATION
Top Margin
Bottom Margin
Left Margin
Right Margin
Skew
Quick Test
ALIGNMENT
Cyan
Yellow
Magenta
Factory Scanner
Factory Manual
MOTOR TESTS (order differs depending upon model)
Align Motor Test
Fuser
Tray 1
Tray 2 (if installed)
Bottom Cartridge
Top Cartridge
Transfer
Mirror Motor Test
Motor Calibration
Servo Laser Test
3-2
Service Manual
See
"Registration" on page
See
"Skew" on page
3-5.
See
"Quick Test" on page
See
"Alignment" on page
A summary page for all the color alignment settings. Can be used in place
of alignment pages for each individual color.
Tests the bump aligner motor. See
Tests the fuser motor. See
Tests tray 1 motor located in the paper pick mechanism. See
motor tests" on page
3-8.
Tests tray 2 motor located in the paper pick mechanism. See
motor tests" on page
3-8.
Tests the bottom cartridge motor located on the EP drive assembly. See
"General motor tests" on page
Tests the top cartridge motor located on the EP drive assembly. See
"General motor tests" on page
Tests the transfer belt assembly motor located on the EP drive assembly.
See
"General motor tests" on page
Tests the mirror motor located in the printhead assembly. See
Motor Test" on page
3-8.
Synchronizes the bump aligner and fuser motor speeds with the transfer
belt speed to ensure that output is printed correctly. See
Calibration" on page
3-9.
Tests servo laser located in the printhead. See
page
3-9.
3-4.
3-6.
3-7.
"General motor tests" on page
"General motor tests" on page
3-8.
3-8.
3-8.
"Servo Laser Test" on
3-8.
3-8.
"General
"General
"Mirror
"Motor

Advertisement

Table of Contents
loading

This manual is also suitable for:

C520C532C5345022C530C524

Table of Contents