Using Media; Using Letterhead; Using Transparencies; Using Envelopes - Lexmark C522 Service Manual

5022-xxx

Using media

Using letterhead

Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Page orientation is important when printing on letterhead. Use the following table for help when loading
letterhead.
Process or paper source
Tray 1
Tray 2
Duplex (two-sided) printing from
trays 1 and 2
Multipurpose feeder
Manual feeder
Duplex (two-sided) printing from
the multipurpose feeder

Using transparencies

Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
•
From MarkVision™ Professional, the printer software, or the control panel, set the Paper Type to
Transparency.
•
Feed transparencies from the standard tray (Tray 1) or the multipurpose feeder.
•
Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to
ensure transparencies are able to withstand temperatures up to 180°C (356°F) without melting,
discoloring, offsetting, or releasing hazardous emissions.
•
Use transparencies that are 0.12–0.14 mm (4.8–5.4 mil) in thickness or 161–179 g/m
•
Print quality and durability depend on the transparencies used.
•
To prevent print quality problems, avoid getting fingerprints on the transparencies.
•
Before loading transparencies, fan the stack to prevent sheets from sticking together.
•
We recommend Lexmark part number 12A8240 for letter-size and Lexmark part number 12A8241 for
A4-size transparencies.

Using envelopes

•
Print samples on the envelopes being considered for use before buying large quantities.
When printing on envelopes:
•
From the control panel, set the Paper Source based on the source in use. From the control panel, the
printer software, or MarkVision Professional, set the Paper Type to Envelope, and select the envelope size.
•
Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure
the envelopes can withstand temperatures up to 180°C (356°F) without sealing, wrinkling, curling
excessively, or releasing hazardous emissions.
•
For the best performance, use envelopes made from 90 g/m
bond) weight for envelopes as long as the cotton content is 25% or less. All-cotton envelopes must not
exceed 90 g/m
•
Use only new envelopes.
1-8
Service Manual
Print side
Letterhead faceup
Letterhead faceup
Letterhead facedown
Letterhead facedown
Letterhead facedown
Letterhead faceup
2
(24 lb bond) weight.
Top of page
Letterhead goes toward the front of the tray
Letterhead goes toward the front of the tray
Letterhead goes toward the rear of the tray
Letterhead top edge enters first
Letterhead top edge enters first
Letterhead top edge enters last
2
2
(24 lb bond) paper. Use up to 105 g/m
in weight.
2
(28 lb