Front Panel Block Connector - FIC K8M-800T/M User Manual

K8M-800T/M Mainboard Manual

Front Panel Block Connector

This block connector includes the
co nn ect ors for linking with t he
Power LED (3-p in), HDD LED,
power but ton, p ower/s leep/mes-
sage waiting button, and the reset
bu tton on the fron t panel of t he
sys tem case. Please ident ify the
polarities of the plug wires for the
case speaker and LEDs. Please ask
v en do r abo u t th is informat io n
when you buy them and install the
system by yourself. The plug wire
polarities of these buttons will not
affect the function.
(1) Reset Switch is connected to the reset button. Push this switch to reboot
the system instead of turning the power button off and on.
(2) HDD LED is connected to the IDE device indicator. This LED will blink
when the hard disk drives are activated.
(3) Power (Single and Dual) /Sleep LED
Please refer to the tables below for the representations of LED states.
There is also 3-Pin Power LED connector on board for those cases that
have a 3-pin plug.
2 - 10