Install Expansion Cards - FIC K8M-800T/M User Manual

K8M-800T/M Mainboard Manual
NOTE:
The CPU installing procedures should be:
1. Insert the CPU (with its fansink and retention module) on the
socket.
2. Connect the 4-pin plug of the power supply
3. Connect the 20-pin plug of the power supply.
To remove the processor, please do it in reverse order.

4). Install Expansion Cards

Th is s ection describ es h ow t o connect an expan sion card t o o ne o f yo ur
system expansion slots. Expansion cards are printed circuit boards that, when
con nected to the mainboard, increase th e cap abilities o f you r sys tem. For
examp le, expans ion cards can p rov ide vid eo and so und capabilit ies . The
mainboard features one AGP and three PCI bus expansion slots.
CAUTION:
1. Make sure to unplug the power supply when adding or remov
ing expansion cards or other system components. Failure to
do so may cause severe damage to both the mainboard and
expansion cards.
2. Always observe static electricity precautions.
3. Please read Handling Precautions at the start of this manual.
2 - 6