Save And Exit Setup; Exit Without Saving - FIC K8M-800T/M User Manual

BIOS Setup
Under the BIOS Feature Setup, if Setup is selected under the Security Option
field and the Supervisor/User Password is enabled, you will be prompted for
the password every time you try to enter the CMOS Setup Utility. If System is
selected and the Supervisor/User Password is enabled, you will be requested
to enter the Password every time you reboot the sy stem or enter the CMOS
Setup utility.

Save and Exit Setup

After you have made changes under Setup, press Esc t o return to the main
menu. Move the cursor to Save and Exit Setup or press F10 and then press Y to
change the CMOS Set up. If you did not change anything, press Esc again or
move the cursor to Exit Without Saving and press Y to retain the Setup settings.
The following message will appear at the center of the screen to allow you to
save data to CMOS and exit the setup utility: SAVE to CMOS and EXIT (Y/N)?

Exit without Saving

If you select this feature, the following message will appear at the center of the
screen to allow you to exit the setup utility without saving CMOS modifications:
Quit Without Saving (Y/N)?
3 - 21