FIC K8M-800T/M User Manual page 44

K8M-800T/M Mainboard Manual
AC Loss Auto Restart
When the system is shut down due to a power failure, the system will not
power back on by itself. This feature allows you to set the system back to
which power status when the system power is resumed. It will always be
back to on if set at On. The system will always be back to off if set at Off.
The options are Auto, On, Off.
IRQ/Event Activity Detect
USB Resume from S3
This feature allows you to wake-up the system by USB device when you
save the computer power at S3. The options are: Enabled, Disabled.
VGA
When set at On, any VGA activity will aThe options are: wake the system.
The options are: OFF, ON.
LPT & COM
When LPT/COM is selected, any access of LPT and COM ports will awake
the system. Likewise, eith er LPT or COM is chosen , the system will be
awaken by any activity of LPT or COM port.
The options are: LPT/ COM, LPT, COM, NONE.
HDD & FDD
When it is set at ON, any access happened at hard drives and floppy drives
will awake the system. The options are: OFF, ON.
PCI Master
To set this feature at ON activates that Power Management feautre (PM)
wake-up event for the PCI bus master card. The options are: OFF, ON.
PowerOn by PCI Card
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM
controlled state. The options are Disabled, Enabled.
Wake Up On LAN/Ring
When set at Enabled, an input signal coming from another client/server on
the LAN/ring awakes th e system from a s oft off s tate if connected over
LAN/modem. The options are Disabled or Enabled.
3 - 16