Spdif Connectors; 1394 Connectors (Optional) - FIC K8M-800T/M User Manual

Installation Procedures
SPDIF Connector
The SPDIF_OUT conn ector is used for au dio out put wit h SPDIF spec. Pin
definitions: Pin1 is 5V, Pin2 is SPDIF signal, Pin3 is GND.

1394 Connectors (optional)

The 2 op tional 1394 pinheaders on th e board provid e you with two connec-
tions for peripherals which have 1394 connectors through an optional bracket
with cab le (see the fig ure below). The pin definitions of the 1394 pinheaders
are lis ted below. The 1394_26 p ort may be in tegrated on rear panel for some
system cases.
2 - 13