Ir And Speaker Connector; Chassis Intrusion Connector - FIC K8M-800T/M User Manual

(4) Power Button is connected with the power button. Pushing this switch
allows the system to be turned on and off rather than using the power
supply button.

IR and Speaker Connector

(1) IR is a pinheader that is used for linking with your ID device to
allow transmission of data to another system that also supports the
IR feature.
(2) SPK is connected with the case
speaker.
NOTE: To use IR functions you must adjust the BIOS features intro-
duced in the section titled Integrated Peripherals, Chapter 3.

Chassis Intrusion Connector

This conn ector allows you to enable (or
disable) system activation if and when the
system out casing is being removed. A high
level signal to the connector will indicate
to the s ystem that the chas sis has b een
opened. Pin 1 is Signal, Pin 2 is GND.
Installation Procedures
2 - 11