Samsung CLX-9201 Service Manual page 79

4) Lens
The light reflected from the mirror-3 is concentrated to the CCD. The distance between the Lens and CCD is aligned
accurately.
5) CCD board
Processes such as signal amplification, signal integration, and A/D conversion are applied on the electrical signal
which was converted by the CCD.
6) Auto Paper Sensor
The size of an original placed on the glass is instantly detected using the Auto Paper Sensor fixed on the Align-frame.
7) Pulley-Driving
The Steel Wire is coiled to this part and rotated by the scan motor. This also transfers the power to move the FR/HR
module.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
2. Product Specifications and Description
2-65