Samsung CLX-9201 Service Manual page 294

4. Troubleshooting
► Error Code
C6–1310
► Error message
Fuser unit is not installed. Install it.
► Symptom
The fuser unit is not installed or fuser unit connector is not connected properly.
► Troubleshooting method
1) Turn the machine off then on.
2) If the problem persists, turn the machine off again.
3) Open the side cover. Check if the fuser unit is installed. If not, install the fuser unit.
4) If the fuser unit is installed, remove it.
(Refer to 3.2.2.5. Fuser unit)
5) Check if the fuser draw connector (JC39–01677A) is broken or defective.
6) Install the fuser unit.
7) If the problem persists, replace the fuser
CAUTION
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing
it, make sure that fuser unit has cooled.
4-111
unit(JC91–01063A(220V) /
Copyright© 1995-2013 SAMSUNG. All rights reserved.
JC91–01064A(110V).