Samsung CLX-9201 Service Manual page 426

4. Troubleshooting
16) Exit DADF Jam
•
Symptom : When copy or scan images using DADF, exit jam is occurred even if there is no jam.
•
Cause :
-
Exit actuator is not returned. (Low resetting force of exit actuator spring.)
•
Troubleshooting
1) Remove the DADF rear cover, DADF front cover, DADF cover-open Assy, Stacker.
(Refer to the disassembly chapter in service manual.)
2) Replace the exit actuator spring.
4-243 Copyright© 1995-2013 SAMSUNG. All rights reserved.