Initial settings Press the language to use on the display screen and then press Next.
Enter the password to use and then press OK. Re-enter the password to confirm it, then press Next. Set the time on the machine. Then press Next.
Remove the existing device name and enter the device name you want to use and then press OK. Then press Next. If necessary, enter the location of the machine in the Location field. If necessary, enter the information in the Administrator field for the person to contact when any problem occurs on the machine.
When Connected appears after pressing the Test button, press Next. Enter the IP address, subnet mask, and gateway in each field. Then press Next.
Enter the Host Name, Domain Name, Primary DNS Server and Secondary DNS Server in each field. The Completed window appears. Press the Close button. The machine restarts.
Installing the supplied software Windows...
Viewing the user’s guide and administrator’s guide...