U1-Xxxx Type (Fuser) Error Code - Samsung CLX-9201 Service Manual

4.5.7. U1-xxxx type (Fuser) error code

► Error Code
U1–2113
U1–2119
► Error message
Fuser Unit Failure: #U1-2113.
Fuser Unit Failure: #U1-2119.
► Symptom
The thermistor can't measure temperature. The hear-roller will not heat-up.
► Troubleshooting method
1) Turn the machine off. Re-install the fuser unit, then turn the machine on.
(Refer to 3.2.2 Fuser unit)
2) Remove the fuser unit. After openinging the jam cover, check if jammed or wrapped paper is in the fuser unit.
3) If the problem persists, check the following :
(Refer to 3.3.23. Fuser unit)
a) Check if the Halogen lamp
b) Check if the AC connection of the Halogen lamp is disconnected or contaminated.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
(110V : 4713-001630 / 220V : 4713–001631)
4. Troubleshooting
is broken or disconnected.
4-184