2.
Configure the ACL parameters according
3.
Click the Add button to add the rule. To activate the current list restart the WAN
interface by clicking the Apply button.
4.
To save the changes to the flash memory, refer to Section
Settings on the
When ACL rules have been added, the top part of the screen displays these rules, as
shown below:
Figure 6-26: Access Control List (ACL) Screen Displaying ACL Rules
To remove a rule, select the radio button corresponding to the rule, and then click
Remove.
SIP User's Manual
Figure 6-25: Access Control List (ACL) Screen
MediaPack' on page
MP-40x SIP MediaPack BRI Series
T able
6-22.
1 0 0 8 H 1 0 7 2 H
1
31).
1 0 7 5 H
112
6.9, '
S aving Configuration
1 0 7 3 H
1 0 7 4 H
Document #: LTRT-53301