Isdn Profiles - AudioCodes MediaPack MP-402 User Manual

SIP User's Manual
Parameter
DTMF Transport
[dtmf-transport<in-
band|nte>]
RFC 2833 Payload Type
[dtmf-nte-payload-type
<payload-type>]
CLEARMODE Payload
Type
[clearmode-payload-type
<payload-type>]
coder group
[coder-group <id>]
Using CLI
To define the IP Profile parameters:
1. Log on to the system.
2. From the main configuration mode, change to the "profile voice ip" mode.
3. To enter the "profile voice ip" mode, use the command:
profile voice ip <1..30>
The last number indicates the profile number.
4. Use the commands in square brackets [xx] to change the parameters.

6.2.4.2 ISDN Profiles

ISDN Profiles describe the properties of an IP-to-ISDN call. The ISDN Profiles option
opens the 'ISDN Profile' screen. This screen is used to define Fax handling, DTM handling,
and codec groups.
To configure the ISDN Profiles:
1. Open the 'ISDN Profiles' screen (Protocol Management menu > Profile Definitions
submenu > ISDN Profiles option).
Version 2.4
Table 6-14: IP Profile Parameters
Description
Defines the method for transporting DTMF.
Valid options include:
nte
In-band = DTMF events are transported using the current voice codec.
Note: DTMF events are transported using named tone events according to RFC
2833.
Defines the payload type to use for NTE. Possible values range from 96 – 127.
Default is 103.
Defines the payload type to use for CLEARMODE. Possible values range from 96
– 127. Default is 97.
Defines the coder group to be used for this profile.
159
6. Configuring the MediaPack
June 2008