Connecting The Rs-232 Serial Interface; Figure 3-7: Rj-45 Connector Pinouts For Isdn S/T Interface; Figure 3-8: Isdn Bri S/T Cabling - AudioCodes MediaPack MP-402 User Manual

SIP User's Manual

Figure 3-7: RJ-45 Connector Pinouts for ISDN S/T Interface

To connect the BRI S/T interface take the next 2 steps:
1. Connect the ISDN splitter cable's RJ-45 connector to one of the BRI S/T ports (labeled
S/T) on the MediaPack's rear panel.
2. Connect the ISDN terminal equipment to one of the RJ-45 ports on the ISDN splitter
using an RJ-45 connector.
3.4.4

Connecting the RS-232 Serial Interface

The RS-232 interface can be used for local configuration using Command Line Interface
(CLI). For a description on accessing the CLI using the RS-232 interface, refer to Section
' R S-232 Interface' on page
6 3 7 H 6 5 7 H
Version 2.4

Figure 3-8: ISDN BRI S/T Cabling

5 7.
6 3 8 H 6 5 8 H
27
3. Installing the MediaPack
June 2008