Table of Contents
Advertisement
SIP User's Manual
6.2.2.8 Tel-to-IP Destination Numbers
The Tel to IP Destination Number Manipulation table is used to define rules for changing
the destination number received in telephone-to-IP calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first successful manipulation.
Note:
To configure Tel-to-IP Destination Numbers:
1.
Open the Tel to IP Destination Number Manipulation Table (Protocol Management
menu > Manipulation Tables submenu > Tel IP Destination Numbers option).
Figure 6-11: Tel to IP Destination Number Manipulation Table
2.
From the 'Position' drop-down list, select the entry that you want to add.
3.
Configure the Number Manipulation table according to
4.
Click the Insert button to insert an entry at the specified position.
5.
To save the changes to the flash memory, refer to Section
Settings on the
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-8: Tel to IP Destination Number Manipulation Table
Parameter
Position
Destination Number
[dest-num-match <num>]
Source Number
[src-num-match <num>]
Version 2.4
For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
Numbers in
Tables' on page
MediaPack' on page
Description
Determines the priority of the configured manipulation rule, where "0" has the
highest priority.
Match the destination number [prefix, suffix, number]
Match the source number [prefix, suffix, number]
C onvention for Entering Phone
9 1 2 H 9 6 1 H
5
6.
9 1 3 H 9 6 2 H
T able
9 1 4 H 9 6 3 H
1
31).
9 6 6 H
159
6. Configuring the MediaPack
6-8.
6.9, '
S aving Configuration
9 6 4 H
9 6 5 H
June 2008
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
