Networking Capabilities - AudioCodes MediaPack MP-402 User Manual

1.4.4

Networking Capabilities

1.4.4.1 Ethernet Interface Configuration
In the current version, Ethernet configuration is supported only by CLI and configuration
file. Both interfaces (LAN and WAN), support the following modes:
Auto: enables auto negotiation
10T: interface configured for 10 Mbps Half duplex
10TX: interface configured for 10 Mbps Full duplex
100T: interface configured for 100 Mbps Half duplex
100Tx: interface configured for 100 Mbps Full duplex
To configure the Media settings using CLI, refer to Section '
1.4.4.2 Multiple Routers Support
Multiple routers support is designed to assist the media gateway when it operates in a
multiple routers network.
To support multiple routers, you can configure multiple static routes. For a description on
adding or removing static routes, refer to Section '
SIP User's Manual
MP-40x SIP MediaPack BRI Series
I P ' on page
5 8 9 H 6 1 2 H
S tatic Routes' on page
5 9 4 H 6 1 4 H
18
1 01.
5 9 0 H 6 1 3 H
1 05.
5 9 5 H 6 1 5 H
Document #: LTRT-53301