Figure 6-18: Coder Groups Screen - AudioCodes MediaPack MP-402 User Manual

SIP User's Manual
2. From the Coder Groups drop-down list, select the coder group number (1 through 5).
3. For the '1
a. From the drop-down list, select the coder you want to use. For the full list of
available coders and their corresponding ptimes, refer to the list above.
b. From the drop-down list to the right of the coder list, select the size of the Voice
Packet (ptime) used with this coder in milliseconds. Selecting the size of the
packet determines how many coder payloads are combined into one RTP (voice)
packet.
4. Repeat steps 2 through 3 for the second to fifth coders (optional).
5. Click the Submit button to save your changes.
6. To save the changes to the flash memory, refer to Section
Settings on the
Notes:
Version 2.4

Figure 6-18: Coder Groups Screen

st
Codec', perform the following:
MediaPack' on page
•
The ptime packetization period depends on the selected coder name.
•
If the ptime is not specified, the ptime gets a default value.
•
The ptime specifies the maximum packetization time the gateway can
receive.
•
Each coder can appear only once.
1 31).
1 0 1 7 H
159
6. Configuring the MediaPack
6.9, ' S aving Configuration
1 0 1 5 H 1 0 1 6 H
June 2008