11 User Instructions; Start-Up; Accessing The User Level Menus; Home Screen - REMEHA Quinta Ace 30 Installation And User Manual

Fig.69 Error details
........ .......
22/02/2018 11:20 ...... .....
Error Code: A.00.00
20/02/2018 16:51
.......... ......... .... ............ ........... ... ..... ....
...... ..... ......... ... ....... .......
..... .. .......: ..... .........
..... ... .......: ..... ........
....... .... .......:
....... ...... .....:

11 User instructions

11.1

Start-up

11.2

Accessing the user level menus

Fig.70 Menu selection
22/02/2018 11:20

Home Screen

Not set
... ...
........ .......
......
Fig.71 Confirm menu selection
22/02/2018 11:20 Home Screen
Not set
... ...
........ .......
......
11.3 Home screen
7684359 - v.11 - 13122021
....... ...
.......
AD-3001381-01
........ .......
AD-3001387-01
........ .......
AD-3001388-01
3. Select the error code you want to investigate.
The display shows an explanation of the error code and several
details of the appliance when the error occurred.
4. To clear the error memory, press and hold the
Start the boiler up as follows:
1. Open the boiler gas tap.
2. Power up the boiler.
3. The boiler runs through an automatic venting program lasting approx.
3 minutes.
4. Check the water pressure of the central heating system shown on the
control panel display. If necessary, top up the central heating system.
The current operating condition of the boiler is shown on the display.
The tiles on the home screen provide quick access for the user to the
corresponding menus.
1. Use the rotary knob to select the required menu.
2. Press the button to confirm the selection.
The available settings of this selected menu appear in the display.
3. Use the rotary knob to select the desired setting.
4. Press the button to confirm the selection.
All options for change will appear in the display (if a setting cannot
be changed, Cannot edit read-only datapoint will appear in the
display).
5. Use the rotary knob to change the setting.
6. Press the button to confirm the selection.
7. Use the rotary knob to select the next setting or press the
return to the home screen.
The tiles on the home screen provide quick access to the corresponding
menus. Use the rotary knob to navigate to the menu of your choice and
press the button to confirm the selection. All options for change will
appear in the display (Cannot edit read-only datapoint will appear in the
display if a setting cannot be changed).
11 User instructions
button.
button to
65