3/4" Raised Grille Panel Routing - Monogram ZISP480DHSS Installation Instructions Manual

3/4" RAISED GRILLE PANEL ROUTING

For 3/4" raised grille panel, routing is required. The router depth is 1/4" all the way around the panel back. Additional panel
width reductions are required per the diagrams below. This will create a "picture frame" routing that will slide onto the
attached grille trim.
TOP
Back Front
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
LEFT
SIDE
Design Guide - Flush Installation
DETAIL TOP
1-1/2"
2" for 36"
models
3/16"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
29
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Front
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
RIGHT
SIDE