3/4" Raised Door Panel Routing - Monogram ZISP480DHSS Installation Instructions Manual

3/4" RAISED DOOR PANEL ROUTING

For 3/4" raised door panel, routing is required. The router depth is 1/4" all the way around the panel back. Additional panel
width reductions are required per the diagrams below. This will create a "picture frame" routing that will slide onto the
attached door trim.
TOP
Back Front
DETAIL HINGE
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Design Guide - Flush Installation
DETAIL TOP
3/4"
11/32"
1/4"
3/32"
DETAIL BOTTOM
SIDE
2-1/16"
HINGE
SIDE
11/32"
1/4"
ROUTER DEPTH 1/4"
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
28
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL HANDLE
3/16"
Front
SIDE
HANDLE
SIDE