Table of Contents
Advertisement
Quick Links
Monogram refrigerators offer a range of
custom appearance options that can be
achieved through the use of optional
trim kits.
This package contains information and
illustrations to demonstrate custom
possibilities. Custom door and grille panel
sizes vary to accommodate the kit being
used. Dimensions for each application is
provided herein.
Dimensions and specifications pages can
be pulled out and faxed or sent to the cabinet
manufacturer so that the panels can be
constructed accurately.
Optional Trim Kit Installation Instructions
are included for reference.
®
GE Monogram
42" Built-In Refrigerators
Custom
Options Guide
and
Installation
Instructions
With Custom Panel Dimensions
and Trim Kit
Installation Instructions
Models:
ZIS42NY
ZISW42DY
ZISB42DY
Advertisement
Table of Contents
Related Manuals for Monogram ZISB42DY
Summary of Contents for Monogram ZISB42DY
- Page 1 Installation Instructions With Custom Panel Dimensions and Trim Kit Installation Instructions Models: ZIS42NY Monogram refrigerators offer a range of ZISW42DY custom appearance options that can be ZISB42DY achieved through the use of optional trim kits. This package contains information and illustrations to demonstrate custom possibilities.
-
Page 2: Table Of Contents
1. Select the appearance option. for ZIS42NY panel sizes and details. See page 2. Order the trim kit for that option. 11 for ZISW42DY/ZISB42DY panel sizes and 3. Order the custom door and grille panels details. from the manufacturer. The exact ZKH1–Provides for the installation of a... -
Page 3: Appearance Options
Monogram Dimensions & Specifications Appearance Options Non-Dispenser Model: ZIS42NY The Standard Product 1/4" or 3/4" Panels With Standard Handles. No Trim Kits required. Dramatic effects are accomplished with the addition of trim kits 3/4" Custom 1/4" Custom Panels 3/4" Custom Trimless... - Page 4 Dimensions & Specifications Appearance Options Dispenser Models using Standard Dispenser Full-Width Trim ZISW42DY, ZISB42DY The Standard Product 1/4" or 3/4" Panels With Standard Handles. No Trim Kits required. Dramatic effects are accomplished with the addition of trim kits 3/4" Custom 1/4"...
- Page 5 Monogram Dimensions & Specifications Appearance Options Dispenser Models with ZWCD1 Custom Collar Trim Kit ZISW42DY, ZISB42DY The Standard Product with Trim Kit ZWCD1 Cus- tom Collar Trim Kit, 1/4" Custom Panels and Standard Handles Dramatic effects are accomplished with additional trim kits 3/4"...
-
Page 6: Design Information
Monogram Dimensions & Specifications ZIS42NY 42" Built-In Refrigerator (non-dispenser) Front View (not to scale) Side View Design Information (not to scale) 41" Case Width Designed to be installed flush with surrounding cabinetry. 24 3/4" 42" Overall Width Cutout dimensions, clearances and side panel sizes are determined by the many installation options available. -
Page 7: 1/4" Thick Panels Using Standard Trim
Monogram Dimensions & Specifications ZIS42NY Custom Door Panel Dimensions Using Standard Trim 1/4" thick panels 42" Built-In Refrigerator (non-dispenser) panels secured to 1/4" thick backing Standard Trim with 1/4" Panels • 1/4" Panels: Cut panels to size. Freezer Panel Fresh Food Panel •... -
Page 8: 3/4" Thick Panels With Zkt42 Trim Kit
Monogram Dimensions & Specifications Custom Door Panel Dimensions ZIS42NY Using Trim Kit ZKT42 42" Built-In Refrigerator (non-dis- 3/4" thick panel with standard handle penser) • The ZKT42 trim kit provides for the installation of 3/4" custom door and grille panels, using the standard full- length handle. -
Page 9: 3/4" Thick Panels With Zkt42 And Zkh1 Trim Kits
Monogram Dimensions & Specifications ZIS42NY Custom Door Panel Dimensions Using Trim Kits ZKT42 and ZKHT1 42" Built-In Refrigerator (non-dis- 3/4" thick panel with custom handle penser) • ZKT42 and ZKHT1 installed together provides for the Freezer Panel Fresh Food Panel installation of 3/4"... -
Page 10: Design Information
Monogram Dimensions & Specifications ZISW42DY (white dispenser) Front View ZISB42DY (black dispenser) (not to scale) 42" Built-In Refrigerator Side View (not to scale) 41" Case Width 24 3/4" Design Information 42" Overall Width Designed to be installed flush with surrounding cabinetry. -
Page 11: 1/4" Thick Panels Using Standard Trim
Dimensions & Specifications ZISW42DY (white dispenser) Custom Door Panel Dimensions Using Standard Trim 1/4" thick panels ZISB42DY (black dispenser) 42" Built-In Refrigerator Panels secured to 1/4" thick backing Standard Trim with 1/4" Panels • 1/4" Panels: Cut panels to size. -
Page 12: 3/4" Thick Panels With Zkt42 And/Or Zwcd1 Trim Kits
Specifications ZISW42DY (white dispenser) Custom Door Panel Dimensions Using Trim Kit ZKT42 ZISB42DY (black dispenser) 3/4" thick panel with standard handle 42" Built-In Refrigerator and/or ZWCD1 custom collar trim • The ZKT42 trim kit provides for the installation of 3/4"... -
Page 13: 3/4" Thick Panels With Zkt42, Zkht1 And/Or Zwcd1 Trim Kits
Dimensions & Specifications ZISW42DY (white dispenser) Custom Door Panel Dimensions Using Trim Kit ZKT42 ZISB42DY (black dispenser) 3/4" thick panel with custom handle 42" Built-In Refrigerator and/or ZWCD1 custom collar trim • ZKT42 and ZKHT1 installed together provides for the installation of 3/4"... -
Page 14: Side Panel Or Filler Options
Monogram Dimensions & Specifications Side Panel or Filler Options For All Monogram Built-In Refrigerators (not to scale) Side panels must be used whenever the sides of the refrigerator 24 3/4" will be exposed. 23 9/16" 1/4" to 3/4" Side Panels 1/4"... -
Page 15: Product Installation
Installation 42" Built-In Refrigerator Before you begin – Read these instructions completely and carefully. IMPORTANT – Save these instructions for local inspector’s use. IMPORTANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer – Be sure to leave these instructions with the Consumer. Note to Consumer –... - Page 16 Cutout Monogram refrigerators offer many installation options. information The finished and rough-in dimensions are determined by the type of installation being made. See Cutout Dimensions on page 6 or 10 and “Side Panel or Filler Options” on page 14.
- Page 17 Installation 42" Built-In Refrigerator Step 6 If you are using 3/4" thick custom panels, see pages 8, Install 1/4" 9, 12 or 13 for panel sizes with ZKT trim kit and/or door panels custom handles. Order the appropriate trim kit to suit the appearance option.
- Page 18 Installation 42" Built-In Refrigerator Personal Injury/Property Damage Hazard WARNING Soffit Block The refrigerator is much heavier at the top. To prevent the refrigerator from tipping over you must: Anti-tip • Install a wood block, the full width of the refrigerator. precautions Secure the block with wood screws penetrating at least 3/4"...
- Page 19 Installation 42" Built-In Refrigerator If you are using 3/4" thick custom panels, SKIP THIS Step 10 Mount 1/4" STEP. See page 12 for grille panel sizes. Order the top grille ZKT kit, and follow the installation instructions panel packed with the kit. Screws The grille panel frame is factory assembled for 84"...
-
Page 20: Zkh1 Trim Kit Installation Instructions
ZKH1 Trim Kit Custom Handles with 1/4" Panels These instructions are divided into 2 options: Tools and materials Option 1—For non-dispenser and dispenser models required: using custom collar trim. • #2 Phillips screwdriver Option 2—For dispenser model using the standard •... - Page 21 ZKH1 Trim Kit Custom Handles with 1/4" Panels Option 1 Installation Step 2 Locate position of handles Handle must be located Note: 3/4" to 1-1/2" from edge of extrusion. • Again, with both doors closed, check the location of • Slide custom panels into fresh food and freezer door the centerlines to be sure they are parallel to the edge frames.
- Page 22 ZKH1 Trim Kit Custom Handles with 1/4" Panels Option 1 Installation Step 3 Assemble panel, extrusion and handle Door Handle • Remove the door extrusions and door panels. • Drill 1/16" pilot hole through extrusion. • Drill clearance holes through the panel and extrusion. •...
- Page 23 ZKH1 Trim Kit Custom Handles with 1/4" Panels OPTION 2 For dispenser model using full-width trim Step 1 Remove handles • Carefully remove the Phillips head screws from the door handle endcaps, top and bottom. • Open door to 90°. Remove the screws from the full-length aluminum handle of the freezer door.
- Page 24 ZKH1 Trim Kit Custom Handles with 1/4" Panels Step 3 Locate position of handle • Position the handle bracket onto the steel door by matching existing screw holes on the door and bracket. Temporary secure with screws. • Re-install dispenser trim, temporarily. •...
- Page 25 ZKH1 Trim Kit Custom Handles with 1/4" Panels Option 2 Installation Step 4 • Drill clearance holes through the handle bracket and Install the dispenser trim. custom handle • Install screw(s) long enough to pass through the handle bracket, dispenser trim and into the custom handle.
-
Page 26: Zg1 Trim Kit Installation Instructions
ZG1 Trim Kit Grille Panel Frame Adjustment The refrigerator is shipped with the top case trim secured at the 83" refrigerator height. The grille panel frame for the top grille is shipped with the unit and is sized to fit a 84" installation height. Discard Side Trim See the Installation page 19 to adjust the case trim to... -
Page 27: Zkt42 Trim Kit Installation Instructions
ZKT42 Trim Kit 3/4" Custom Panels These instructions are divided into 2 options: Tools and materials Option 1—For non-dispenser and dispenser models required: using custom collar trim. • #2 Phillips screwdriver Option 2—For dispenser model using the standard • Stubby Phillips screwdriver full-width trim. - Page 28 ZKT42 Trim Kit 3/4" Custom Panels OPTION 1 • Carefully remove the Phillips head screws from the For non-dispenser door handle endcaps, top and bottom. model • Open door to 90°. or dispenser model • Remove the Phillips head screws from the full-length using custom handles.
- Page 29 ZKT42 Trim Kit 3/4" Custom Panels Option 1 Installation Step 3 Apply panel support brackets Dimension A ZKT42–6-3/4" Dimension B ZKT42–7-7/8" • Position support bracket on freezer panel, • Secure support brackets to the bottom of the panels dimension A, from the hinge side edge. with #4 screws provided.
- Page 30 ZKT42 Trim Kit 3/4" Custom Panels Option 1 Installation Step 5 The refrigerator is shipped with the top case trim Adjust secured at the 83" refrigerator height. grille panel • Loosen 2 screws on both sides and raise the case height trim to meet soffit height, from 83"...
- Page 31 ZKT42 Trim Kit 3/4" Custom Panels OPTION 2 • Carefully remove the Phillips head screws from the For dispenser freezer door handle endcaps, top and bottom. model using • Open freezer door to 90°. full-width • Remove the Phillips head screws from the full-length trim handles.
- Page 32 ZKT42 Trim Kit 3/4" Custom Panels Step 4 Install panels • Install the lower panel by slipping tabs into the slots • Place the upper panel onto the top of the dispenser on the underside of the dispenser trim. with tabs inserted into the slots. •...
-
Page 33: Zkht1 Trim Kit Installation Instructions
ZKHT1 Trim Kit Custom Handles with 3/4" Panels These instructions are divided into 2 options: Tools and materials Option 1—For non-dispenser and dispenser models required: using custom collar trim. • #2 Phillips screwdriver Option 2—For dispenser model using the standard •... - Page 34 ZKHT1 Trim Kit Custom Handles with 3/4" Panels Step 1 Temporarily mount door panels • Place the prepared 3/4"custom door panels on the • Secure the panel to the trim temporarily by driving bottom trim with support bracket tabs inserted 2 screws through the back side of the trim at the top.
- Page 35 ZKHT1 Trim Kit Custom Handles with 3/4" Panels Option 1 Installation Step 3 • Remove the door extrusions and door panels. Assemble panel, • Drill 1/16" pilot hole through extrusion. extrusion • Drill clearance holes through the panel and extrusion. and handle •...
- Page 36 ZKHT1 Trim Kit Custom Handles with 3/4" Panels Option 1 Installation OPTION 2 For dispenser model using full-width trim Before Optimal final Caution: appearance depends on careful begin routing depth. Do not exceed 1⁄4" routing depth. All 3 custom door panels must be routed to accommo- Refer to installation instructions for ZKT42 trim kit, date the door extrusions.
- Page 37 ZKHT1 Trim Kit Custom Handles with 3/4" Panels Option 2 Installation Step 2 • Drill clearance holes through the handle bracket and Install the dispenser trim. custom handle • Install screw(s) long enough to pass through the handle bracket, dispenser trim and into the custom handle.
-
Page 38: Zwcd1 Trim Kit Installation Instructions
ZWCD1 Trim Kit Custom Dispenser Collar Tools and materials required: • #2 Phillips screwdriver • Drill and appropriate bits • Custom door panels • Safety glasses Parts List: contents A. Collar trim (Both black and white trim included) B. Top bracket C. - Page 39 ZWCD1 Trim Kit Custom Dispenser Collar The use of this custom collar trim requires that the hole Cut dispenser for dispenser be located and cut very accurately . 3/4" hole and rout door panel door panels must be routed on all 4 sides of the dispenser cutout.
- Page 40 Note: While performing installations described in this book, safety glasses or goggles should be worn. To obtain specific information concerning any ® Monogram product or service, call GE Answer Center consumer information service at 800.626.2000–any time, day or night. For Monogram local service in your area, call 1-800-444-1845.