3/4" Raised Grille Panel Routing; Optional Accessory Kits - Monogram ZICS360NHRH Installation Insrtuctions

3/4" RAISED GRILLE PANEL ROUTING

For 3/4" raised grille panel, routing is required. The router depth is 1/4" all the way around the panel back. Additional panel
width reductions are required per the diagrams below. This will create a "picture frame" routing that will slide onto the
attached grille trim.
TOP
Back Front
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
LEFT
SIDE

Optional Accessory Kits

• ZKHCSS2: Monogram Tubular Stainless Steel handles
designed to fit 3/4" overlay panels. This kit also includes a
handle side trim for custom handles.
• ZKHPSS1: Professional Tubular Stainless Steel Handle
designed to fit 3/4" overlay panels. Kit includes one handle.
Order 2 kits for bottom-freezer refrigerators from your
Monogram supplier.
Design Guide - Flush Installation
DETAIL TOP
1-11/16"
3/16"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
3/4" PANEL BOTTOM VIEW
Front
Back
(AFTER ROUTING)
• ZUG2: For side-by-side installation of two trimmed bottom-
freezer refrigerators. This kit provides for the installation of
a unified custom grille panel to span the width of two units
using a framed or overlay panel.
• ZKHCT: Handle side trim for left-hand and right-hand doors.
For use on custom panels when using a custom handle.
26
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Front
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
RIGHT
SIDE