Table of Contents
Advertisement
3/4" RAISED PANEL DIMENSIONS
For a more custom appearance raised panels may be
installed on trimmed models. The panels must be 3/4"
thick at and routed per the instructions below in order to
guarantee proper operation
IMPORTANT NOTE – DISPENSER MODELS
The refrigerator is supplied with 3 dispenser trims; 2 for standard
installation and 1 for flush installation. The overlay dispenser
trim is designed to fit a total panel thickness of 0.85" or 0.75".
• If the panel is less than 0.75" a noticeable gap may be created
around the dispenser trim.
Panel Dimensions
E
15-3/8"
F
9-5/8"
WARNING
Door Trim Pinch Point Hazard
Door Trim Pinch Point Hazard
Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially with
children. To minimize this risk you must follow the
installation instructions for cabinet dimensions,
trim assembly, and door stop angle.
Design Guide - Flush Installation
36" Side-by-Side
Fresh Food
3/4" Raised Panel
68-5/8" x 20-7/8"
42" Side-by-Side
Fresh Food
3/4" Raised Panel
68-5/8" x 26-7/8"
48" Side-by-Side
Fresh Food
3/4" Raised Panel
68-5/8" x 28-7/8"
IMPORTANT NOTE: Maximum total weight for
the assembled panels:
•
Fresh food door panel – 75 lbs.
•
Freezer door panel – 53 lbs.
•
Grille Panel – 18 lbs.
Door
3/4"
Raised
Panel
• If the panel is more than 0.85" the dispenser trim cannot be
secured to the door.
• The overlay panel must be constructed according to the
specifications shown to achieve the correct total thickness.
See Dispenser Trim Fit Example, page 30.
Freezer
68-5/8" x 16-7/8"
Freezer
68-5/8" x 16-7/8"
Freezer
68-5/8" x 20-7/8"
AVERTISSEMENT
Risque de pincement de la garniture de porte
Une installation incorrecte représente un risque de
pincement pour les doigts entre le côté de la garniture de
porte et les armoires lors de l'ouverture ou de la fermeture
de la porte, spécialement pour les enfants. Pour réduire ce
risque, vous devez suivre les instructions d'installation selon
les dimensions des armoires, l'assemblage de garniture et
l'angle de butée de la porte.
27
Grille
Dispenser Cutout Position
E
38" x 11-3/16"
17-23/32"
Grille
Dispenser Cutout Position
E
44" x 11-3/16"
17-23/32"
Grille
Dispenser Cutout Position
E
50" x 11-3/16"
17-23/32"
F
3-3/8"
F
3-3/8"
F
5-3/8"
Advertisement
Table of Contents
