3/4" Raised Grille Panel Routing - Monogram ZIRS360NHLH Installation Instructions Manual

3/4" RAISED GRILLE PANEL ROUTING

For 3/4" raised grille panel, routing is required. The router depth is 1/4" all the way around the panel back. Additional
panel width reductions are required per the diagrams below. This will create a "picture frame" routing that will slide
onto the attached grille trim.
TOP
Back Front
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
LEFT
SIDE
NOTE: For panels constructed with rails and stiles (5-panel), the minimum width is 3" for rails and 4" for stiles.
Design Guide - Flush Installation
1-7/16"
1/8"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
DETAIL TOP
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
28
NOTE: Routed areas should be
finished as the ma be visible
when assembled.
Front
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
RIGHT
SIDE