Custom Handle Design Guide; 3/4" Custom Decorative Panel Dimensions - Monogram ZIRNPKII Installation Instructions Manual

Design Guide - Custom Overlay Door Panel

CUSTOM HANDLE DESIGN GUIDE

Custom handles must be used for flush installation. For
custom handle installation, counter-bore holes in rear of
decorative panels must ensure 1/2" (1.27cm) material
thickness remains for handle support.
NOTE: The counterbore must not exceed 1" (2.54cm) in
diameter.
1/4"
(0.64cm)
3/4"
(1.91cm)

3/4" CUSTOM DECORATIVE PANEL DIMENSIONS

For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding
cabinets. The overlay panel must be 3/4" (1.91cm) thick.
Panel attaches to included brackets to provide mounting
to the appliance door.
NOTE: We recommend that decorative panels have
inside corners and edges rounded or beveled by cabinet
maker to avoid sharp edges on the panels. Edges to be
treated should include the top, bottom and hinge side
edges.
IMPORTANT NOTE: Maximum panel weight is 45 lbs.
NOTE: For panels constructed with rails and stiles
(5-panel), the rails and stiles must be a minimum of 2"
(5.08cm) wide.
For Stainless Panel Kits, see Stainless Steel Door
Panel Installation on page 45.
For Custom Panels, use templates provided with the
units to pre-drill holes for mounting panel brackets
(provided with unit). Adjustment screws and instructions
are provided.
WARNING
d
Point Hazard
Improper installation can lead to a finger pinch point
hazard between the side door trim and the cabinets
when operating the door, especially with children.
To minimize this risk you must follow the installation
instructions for cabinet dimensions, trim assembly,
and door stop angle.
1/2"
(1.27cm)
Door Trim Pinch
Minimum distance from panel side edge to handle center
should be 1-1/2" (3.81 cm) as shown.
IMPORTANT: Custom decorative door panel width
installations.
Single Model Installation
Panel
18" Models
Dimension
A 17-1/2"
(44.45cm)
B 79-7/8"
(202.88cm)
Dual Model Installation
Panel
18" Models
Dimension
A 17-9/16"
(44.61cm)
B 79-7/8"
(202.88cm)
52
3-1/2"
(3.81cm)
A
Door
B
Panel
24" Models 30" Models
23-1/2"
(59.69cm)
79-7/8"
(202.88cm) (202.88cm)
24" Models 30" Models
23-9/16"
(59.85cm)
79-7/8"
(202.88cm) (202.88cm)
29-1/2"
(74.93)
79-7/8"
29-9/16"
(75.09)
79-7/8"
31-49133-1