First Side Cis Unit, First Side Cis Flat Cable - Brother DCP-7080 Service Manual

9.16 First Side CIS Unit, First Side CIS Flat Cable

Note:
• Disassemble in a dust-free location.
(1) Remove the six taptite bind B M4x12 screws.
(2) Remove the document scanner top cover from the document scanner bottom cover
ASSY.
(3) Remove the CIS roller holder L ASSY and the CIS roller holder R ASSY from the first
side CIS unit.
Taptite bind B M4x12
CIS roller holder
R ASSY
First side CIS unit
CIS roller holder L ASSY
Assembling Note:
• If you replaced the first side CIS unit, refer to
CIS UNIT OR DOCUMENT SCANNER UNIT" in Chapter 4
Taptite bind B M4x12
Fig. 3-59
"5. IF YOU REPLACE THE FIRST SIDE
3-64
Document scanner
top cover
Document scanner
bottom cover ASSY
to configure settings.
Confidential