Brother DCP-7080 Service Manual page 20

HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely
hot. Wait at least 10 minutes for the product to cool down before you touch the internal
parts of the product.
When you move the product, grasp the side handholds that are under the scanner. DO
NOT carry the product by holding it at the bottom. If you do not carry the machine properly,
the machine could slip out of your hands, and injury could result.
Some areas of the product can cause injury if covers (shaded) are closed with force. Take
care when placing your hand in the areas shown in the illustrations, and DO NOT close
the covers with force.
xvii
Confidential