Registration Front/Rear Actuator Holder Assy - Brother DCP-7080 Service Manual

9.36 Registration Front/Rear Actuator Holder ASSY

Note:
• As the under bar is easy to bend, be careful to handle it.
(1) Release the hook part of the under R FG wire from the LVPS shield plate.
(2) Remove the taptite cup S M3x8 SR screw, and remove the laser R FG plate.
(3) Remove the taptite cup S M3x8 SR screw and the taptite bind B M4x12 screw. Pull out
the right side of the LVPS shield plate in the direction of the arrow A to remove it from
the pin. Then pull it out in the direction of the arrow B to remove it from the machine.
<Bottom side>
<Back side>
Under bar
Pin
Taptite cup S M3x8 SR
Fig. 3-103
<Rear view of frame R>
Hook part
B
Taptite cup S M3x8 SR
3-97
Under R FG wire
LVPS shield plate
A
Taptite bind B M4x12
Laser R FG plate
Confidential