Brother DCP-7080 Service Manual page 166

<For models with handset>
(4) Remove the two taptite bind B M4x12 screws. Release the hooks to remove the handset
holder ASSY from the side cover L.
Hook
Handset holder ASSY
Harness routing: Refer to
(5) Remove the taptite cup B M3x8 screw. Release the hooks A to remove the upper
handset holder from the lower handset holder.
(6) Release the hook harness from the securing fixtures. Release the hook B to remove the
hook switch PCB ASSY from the lower handset holder.
(7) Remove the actuator hook from the hook switch PCB ASSY.
Hooks A
Actuator hook
Hook switch PCB ASSY
Harness routing: Refer to
Hook
Fig. 3-19
"11. Hook switch PCB
Hook B
Lower handset holder
Fig. 3-20
"11. Hook switch PCB
3-33
Side cover L
ASSY".
Upper handset holder
Hooks A
Hook
harness
Taptite cup B M3x8
ASSY".
Taptite bind B M4x12
Confidential