Brother DCP-7080 Service Manual page 59

Error Messages
Upper line
Jam Inside Open the Front Cover,
pull out the Drum Unit
and remove the
jammed paper.
Jam Rear Open the Back Cover
and remove the
jammed paper, then
press [Retry].
Jam Tray Remove the jammed
paper from Tray.
Machine Error ** -
Manual Feed Load Paper in Manual
Feed.
No Paper Reload paper in Tray.
No Toner Open the Front Cover,
then install the Toner
Cartridge.
Out of Memory Press stop[x].
Phone line may Check line connection.
not be connected Refer to User's Guide.
Print Data Full Print Data is full. Press
Stop[x] and delete the
previously stored data.
Print Unable **
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
Scan Unable **
Scanner Error -
Lower line
The eject sensor does not detect
paper pass after the registration
rear sensor detected the paper
pass.
The eject sensor remains ON
(paper pass detected) even after
the registration rear sensor
detected the end of paper pass.
When printing from the paper tray,
the registration front sensor does
not detect paper pass within the
specified time after the paper feed
sensor detected paper pass.
A machine error occurred.
Refer to the error code "**".
There is no paper set in the manual
feed slot on the manual feed slot fix
mode.
When printing from the paper tray,
the paper feed sensor detected
that there was no paper set in the
paper tray.
The new toner sensor detected
that the toner cartridge was not set.
There is insufficient memory to
expand PC print data.
Auto-detect ended without
detecting the line voltage.
The memory size allotted for
Secure print was exceeded when
saving Secure print data.
Printing error
Refer to the error code "**".
Dot count or develop roller counter of
the toner has reached the upper limit
in the toner stop mode.
Scanning error
Refer to the error code "**".
Detected that the first or second
side CIS flat cable was not inserted
correctly when function code 55
was executed.
A white level not within the
standard was scanned when
function code 55 was executed.
A black level not within the
standard was scanned when
function code 55 was executed.
2-24
Description
Error Refer
codes to:
7000 2-44
7100 2-45
7300 2-45
--- ---
8C00 2-48
9302 2-49
6101 2-41
C700 2-55
--- 2-94
C800 2-55
--- ---
4C01 2-39
--- ---
B000 2-53
BB00 2-54
BD00 2-54
Confidential