Brother DCP-7080 Service Manual page 92

 Error code E000
Print Unable E0
Turn the power off and then back on again.
An error occurred in the ROM check sum.
Error code E100
Print Unable E1
Turn the power off and then back on again.
Program error
<User Check>
• Install the latest firmware.
Step
1 Main PCB failure
 Error code E500
Print Unable E5
Turn the power off and then back on again.
An error occurred during access to the DRAM in the main PCB ASSY.
Error code E600
Print Unable E6
Turn the power off and then back on again.
Write error in the EEPROM of the main PCB ASSY
Error code E701
Print Unable E7
Turn the power off and then back on again.
Irregular operation of the flash ROM file system on the main PCB.
Error code E702
Print Unable E7
Turn the power off and then back on again.
Read error in the flash ROM on the main PCB
Step
1 Main PCB failure
 Error code F900
Machine Error F9
-
The country code was not entered correctly.
Step
The power was turned OFF while
1
function code 74 was running.
Main PCB failure
2
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Reenter the country code.
Replace the main PCB ASSY.
2-57
Remedy
Remedy
Remedy
Confidential