Speaker Unit - Brother DCP-7080 Service Manual

9.19 Speaker Unit

(1) Disconnect the speaker harness from the main PCB ASSY, and release it from the
securing fixtures.
(2) Remove the speaker hold spring while pushing the hook of the speaker hold spring with
a flat-blade screwdriver.
(3) Remove the speaker unit.
Speaker hold spring
Speaker unit
Speaker harness
Harness routing: Refer to
Hook
Fig. 3-70
"6. Speaker unit, Modem (Main PCB
Modem (LVPS side)".
Main PCB ASSY
3-73
side)", "7. Speaker unit,
Confidential