Set Country / Language (Function Code: 52) - Brother DCP-7080 Service Manual

1.3.14 Set country / language (function code: 52)

<Function>
This function is user accessible, and is used to customize the EEPROM according to the
language, function settings, and firmware switch settings.
Note:
• This function can be used only in the following nations: Around France, Pan-Nordic,
East Europe, and Iberia.
<Operating Procedure>
For models without keypad
(1) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 52" on the LCD, and
press the [OK] key. "Set Country" is
displayed on the LCD.
(2) Press the [▲] or [▼] key to select the
country to be shipped, and then press
the [OK] key.
(3) Press the [▼] key. The new setting is
saved. Once the saving is completed,
the machine returns to the ready state.
Around France
France
België / Belgique
Nederland
ITALY/IBERIA PAN-NOLDIC
Italia Norge
España Sverige
Portugal Suomi
Danmark
Others
5-25
For models with keypad
(1) Press the [5], and then the [2] key in the
initial state of user maintenance mode.
"Set Country" is displayed on the LCD.
(2) Select the country to be shipped, and
then press the [SET] or [OK] key.
(3) Press the [Yes] key. The new setting is
saved. Once the saving is completed,
the machine returns to the ready state.
CEE
Ceska republika
Magyarorsazág
POLSKA
България
România
Slovensko
Slovenija
Hrvatska
Others
Middle East And
North Africa
M.East & Africa
Türkiye
Confidential