Disassembly Procedure; Preparation - Brother DCP-7080 Service Manual

9. DISASSEMBLY PROCEDURE

9.1 Preparation

 Transferring Received FAX Data
In case of machine failure, unplugging the power cord is required for sending the machine to
repair. In this regard, received fax data left in the machine would be lost.
To prevent such data loss, fax files left in the machine can be transferred to other fax
machines or PCs. Service personnel should instruct end users (e.g., by telephone) to
transfer data by themselves using the procedure below.
Note:
• The number of files that can be transferred at a time is 99. When there are 100 or more
files, the operation procedure below must be performed several times to transfer all
files.
TIP:
• If there are both color and monochrome data in a file to be transferred, the monochrome
data will be transferred first. If the receiver machine does not support the color function,
the sender machine cannot transfer color data, resulting in an error.
Transfer the received FAX data as described in
information (function code: 53) (fax models only)" in Chapter
"1.3.15 Transfer received fax data / log
5.
3-23
Confidential