Brother DCP-7080 Service Manual page 52

Error
Description
codes
The first side document scanning
position sensor detected that the
A200
document length was 90 cm or longer
while scanning the document.
The first side document scanning
position sensor has not detected the
A300 top of the document even after the
document has been fed for the
specified distance.
The ADF cover sensor detected that
A400
the ADF cover was open.
When scanning the fax, white or black
correction data for the first side CIS
A500
was not within the correct range. (First
time)
When scanning the fax, white or black
correction data for the first side CIS
A600
was not within the correct range.
(Second time)
Color parameter in the ROM does not
A700 match the first side CIS or second
side CIS.
A800 ―
A900 ―
AA00 ―
AB00 ―
When scanning the fax, white or black
correction data for the second side
AC00
CIS was not within the correct range.
(First time)
Image processing cannot be
completed correctly because the
number of pixels required for image
AD00
processing is insufficient in the
scanned data for the first side of the
document.
Home position is still being detected
AF00 even after the first side CIS was
moved.
Detected that the first side CIS flat
cable or second side CIS flat cable
B000
was not inserted correctly when
function code 55 was executed.
B300 ―
B400 ―
B700 ―
B800 ―
B900 ―
BA00 ―
A white level not within the standard
BB00 was scanned when function code 55
was executed.
Refer Error
to: codes
When scanning the fax, white or black
correction data for the second side
2-50 BC00
CIS was not within the correct range.
(Second time)
A black level not within the standard
2-51 BD00 was scanned when function code 55
was executed.
2-51 BE00 ―
The first side document scanning
position sensor detected that the ADF
2-52 BF00 was unable to duplex-feed the
document because the document is
400 mm or longer.
2-52 C001 ―
2-52 C002 ―
C003 ―
C004 ―
There is insufficient memory to
C700
expand PC print data.
The memory size allotted for Secure
C800 print was exceeded when saving
Secure print data.
2-52 C900 ―
2-53 CA00 ―
An error occurred while initializing the
2-53 D100
modem.
Detected the modem PCB was not
2-53 D200
connected.
An error occurred while initializing the
D800
touch panel.
Communication between the panel
D900 PCB and main PCB was unable while
initializing the touch panel.
There was no response from the
DA00 panel PCB for the specified time after
initializing the panel PCB.
DB00 ―
An error occurred in the ROM check
E000
sum.
E100 Program error
2-54 E400 ―
2-17
Description
Confidential
Refer
to:
2-54
2-54
2-55
2-55
2-55
2-55
2-56
2-56
2-56
2-56
2-57
2-57