Brother DCP-7080 Service Manual page 178

(3) Remove the two CIS spacers from the second side CIS unit.
(4) Take off the second side CIS flat cable attached on the back of the ADF unit from the
double-sided tape.
Note:
• Be sure to replace the double-sided tape with a new one, after taking off the second
side CIS flat cable from the double-sided tape.
(5) Lift the second side CIS unit, and disconnect the second side CIS flat cable.
(6) Remove the two CIS springs from the ADF unit.
Second side CIS flat cable
<Rear view of the
ADF unit>
Second side CIS
flat cable
Double-sided tape
CIS spacer
Second side CIS unit
CIS spring
ADF unit
Fig. 3-35
3-45
CIS spacer
CIS spring
Confidential