Fuji Xerox ApeosPort-IV C5575 User Manual page 62

2 Product Overview
No. Component
7 <Interrupt> button
8 <Clear All> button
9 <Stop> button
10 <Start> button
11 <Main Power> indicator
2
12 <Error> indicator
13 <Data> indicator
14 <Speed Dial> button
15 <C (Clear)> button
16 <Dial Pause> button
17 Numeric keypad
18 <Custom Button 1> (Copy)
19 <Custom Button 2>
62
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode. Refer to "16 Appendix" >
"Notes and Restrictions" > "Notes and Restrictions on the Interrupt Mode" in the
Administrator Guide.
Returns the settings you made to the default values. The machine returns to
the same state as when it is powered on.
Press this button to pause the current job or communications.
Press this button to start scanning a document.
Lights up when the main power is switched on.
Note • If the main power is not switched on, the machine will not be powered on
even when the power is switched on.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper or toner.
If the <Error> indicator blinks, contact our Customer Support Center.
If the <Error> indicator lights up, refer to "15 Problem Solving" > "Machine Trouble" in the
Administrator Guide.
Blinks when the machine is sending or receiving data to or from a client.
This indicator lights up when data is stored in the machine's memory, when
received faxes are waiting to be printed, or when faxes are stored in a folder.
You can check stored scan files in a Folder List. For information on the Folder List, refer to "4
Machine Status" > "Machine Information" > "Print Reports" > "Folder List" in the
Administrator Guide.
You can check stored fax files in a Stored File List. For information on the Stored File List, refer
to "4 Machine Status" > "Machine Information" > "Print Reports" > "Job Status/Activity
Report" > "Stored File List" in the Administrator Guide.
You can change the lighting pattern of the <Data> indicator. For more information, refer to
"5 Tools" > "Common Service Settings" > "Other Settings" > "Data Indicator" in the
Administrator Guide.
Press this button to specify a recipient with an address number when
sending a fax or e-mail.
Press this button to cancel a numerical value you have entered with the
numeric keypad.
Press this button to insert a pause into a destination number.
Use the numeric buttons on the keypad to enter the number of copies,
passcodes, and other numerical values.
"Copy" is assigned to this button by default.
Press this button to display the [Copy] screen.
For information on how to assign a service to the button, refer to "1 Before Using the
Machine" > "Customizing the Control Panel" > "Assigning Services to the Custom Buttons" in
the Administrator Guide.
Press this button to call its associated service.
To the button, you can assign [Language] or any service displayed on the
[Services Home] screen.
For information on how to assign a service to the button, refer to "1 Before Using the
Machine" > "Customizing the Control Panel" > "Assigning Services to the Custom Buttons" in
the Administrator Guide.
Function