Fuji Xerox ApeosPort-IV C5575 User Manual page 295
Hide thumbs
Also See for ApeosPort-IV C5575:
- Administrator's manual (771 pages) ,
- Administration manual (731 pages) ,
- User manual (463 pages)
Table of Contents
Advertisement
1
Select any option.
Off
The file is not encrypted, and no access privilege is assigned.
Password (V4 Compatible)
Encrypts the file by the 56 bit DES method using a password. Files encrypted by this method
can be opened with DocuWorks Ver. 4.0 or later.
Select [Open Password] to set a password.
Password (V4 Incompatible)
Encrypts the file by the 128 bit AES method using a password. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Open Password] to set a password.
Digital Certificate (V4 Incompatible)
Encrypts the file by the 128 bit AES method using a certificate. Files encrypted by this
method can be opened with DocuWorks Ver. 5.0 or later.
Select [Certificate] to set a certificate.
Important • If you encrypt a file using a certificate without Basic Constraints, you cannot use DocuWorks Ver.
5.0.1 and Ver. 6.0.1 to open the file. To use such certificates, use DocuWorks Ver. 5.0.2, or Ver. 6.0.2
or later.
Note
• This feature is supported only by the ApeosPort series.
• When you select [Full Access Password] or [Open Password] in [Digital Certificate (V4
Incompatible)], the same certificate name may be redundantly displayed in [Security Settings] of a
DocuWorks document to be generated, in the following conditions. However, this does not affect
the operation.
- When you created a job flow on the machine, the same certificate was selected redundantly.
- The certificate data was obtained from an LDAP server, and the same certificate was selected
redundantly.
Encryption Algorithm
Displays the encryption methods.
Restricted Operations
Select file operations to assign access privileges. When assigning access privileges, set [Full
Access Password].
Open Password
Displays the [DocuWorks Security - Open Password] screen.
If you select [On] and set a password, the file is encrypted. To open the file, the password is
required. The access privileges set in [Restricted Operations] are assigned.
You can enter a password with up to 32 characters.
E-mail
5
295
Advertisement
Table of Contents
