Delay Start - Fuji Xerox ApeosPort-IV C5575 User Manual

4 Fax
1
Select [Priority Send/Delay Start].
2
Select any option.
Priority Send
Off
Priority Send is not applied.
4
On
Priority Send is applied.
Note
You can give priority to a pending job. For more information, refer to "Job Status" (P.401).

Delay Start

Off
Delay Start is not applied.
Specific Time
Delay Start is applied.
Note
Specific Time
Displays the [Delay Start - Specific Time] screen.
Refer to "[Delay Start - Specific Time] Screen" (P.225).
224
• If the Priority Send feature is selected during transmission, the fax will be sent after the current
transmission ends.
• In redial mode, the fax will be resent preferentially after the specified redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-polling
jobs.
• You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delay Start] independently for each address number. For information on how to
register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
• If you use address numbers or group dial numbers to specify recipients for the Broadcast Send
feature, the [Delay Start] setting specified for each address number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is busy, it will
be sent as soon as the line becomes available.